Advertisements
Advertisements
प्रश्न
The object to be electroplated is taken as ______ electrode.
Advertisements
उत्तर
The object to be electroplated is taken as negative electrode.
Explanation:
The object to be electroplated is taken as negative electrode or cathode, so that the free ions get deposited on it.
APPEARS IN
संबंधित प्रश्न
Name three liquids, which when tested in the manner shown in Figure, may cause the magnetic needle to deflect.
Prepare a list of objects around you that are electroplated.
The process that you saw in the image is used for the purification of copper. A thin plate of pure copper and a thick rod of impure copper are used as electrodes. Copper from impure rod is sought to be transferred to the thin copper plate. Which electrode should be attached to the positive terminal of the battery and why?
Boojho’s uncle has set up an electroplating factory near his village. He should dispose off the waste of the factory
Paheli set up an experiment using liquid A in the beaker as shown in the following figure. She observed that the bulb glows. Then she replaced the liquid A by another liquid B. This time the bulb did not glow. Boojho suggested replacing the bulb by an LED. They observed that the LED glows. Explain.
In the circuit given as figure, Boojho observed that copper is deposited on the electrode connected to the negative terminal of the battery. Paheli tried to repeat the same experiment. But she could find only one copper plate. Therefore, she took a carbon rod as negative electrode. Will copper still be deposited on the carbon rod? Explain your answer.
The terminal which is connected to a positive terminal of a battery is called ______.
Liquids that conduct electricity are the solutions of ______.
______ is used in the extraction and purification of metals.
What are anodes and cathodes?
