Advertisements
Advertisements
प्रश्न
The length of a hall is 18 m and the width 12 m. The sum of the areas of the floor and the flat roof is equal to the sum of the areas of the four walls. Find the height of the wall.
Advertisements
उत्तर
\[\text { Length of the hall = 18 m }\]
\[ \text { Its width = 12 m } \]
\[\text { Suppose that the height of the wall is h m } . \]
\[\text { Also, sum of the areas of the floor and the flat roof = sum of the areas of the four walls } \]
\[ \Rightarrow 2 \times\text { (length }\times \text { breadth)
}= 2 \times \ \text { (length + breadth) }\times \text { height }\]
\[ \Rightarrow 2 \times (18 \times 12) = 2 \times (18 + 12) \times h\]
\[ \Rightarrow 432 = 60 \times h\]
\[ \Rightarrow h = \frac{432}{60} = 7 . 2 m\]
\[ \therefore \text { The height of wall is 7 . 2 m . }\]
संबंधित प्रश्न
What will happen to the volume of a cuboid if its Length is doubled, height is same and breadth is halved?
A swimming pool is 20 m long 15 m wide and 3 m deep. Find the cost of repairing the floor and wall at the rate of Rs 25 per square metre.
A field is 150 m long and 100 m wide. A plot (outside the field) 50 m long and 30 m wide is dug to a depth of 8 m and the earth taken out from the plot is spread evenly in the field. By how much is the level of field raised?
The area of the floor of a room is 15 m2. If its height is 4 m, then the volume of the air contained in the room is
The cost of constructing a wall 8 m long, 4 m high and 10 cm thick at the rate of Rs. 25 per m3 is
If the sum of all the edges of a cube is 36 cm, then the volume (in cm3) of that cube is
Find the area of metal-sheet required to make an open tank of length = 10 m, breadth = 7.5 m and depth = 3.8 m.
The external dimensions of an open wooden box are 65 cm, 34 cm, and 25 cm. If the box is made up of wood 2 cm thick, find the capacity of the box and the volume of wood used to make it.
Find the volume of a cuboid whose diagonal is `3sqrt(29)"cm"` when its length, breadth and height are in the ratio 2 : 3 : 4.
Below are the drawings of cross sections of two different pipes used to fill swimming pools. Figure A is a combination of 2 pipes each having a radius of 8 cm. Figure B is a pipe having a radius of 15 cm. If the force of the flow of water coming out of the pipes is the same in both the cases, which will fill the swimming pool faster?
