हिंदी

Name the quantity which is measured in Wh.

Advertisements
Advertisements

प्रश्न

Name the quantity which is measured in Wh.

एक पंक्ति में उत्तर
Advertisements

उत्तर

Wh - Watt hour is measure of ENERGY.

shaalaa.com
  क्या इस प्रश्न या उत्तर में कोई त्रुटि है?
अध्याय 2: Work, Energy and Power - EXERCISE - 2(A) [पृष्ठ २८]

APPEARS IN

सेलिना Concise Physics [English] Class 10 ICSE
अध्याय 2 Work, Energy and Power
EXERCISE - 2(A) | Q 30. (c) | पृष्ठ २८

संबंधित प्रश्न

The blades of a windmill sweep out a circle of area A.

  1. If the wind flows at a velocity v perpendicular to the circle, what is the mass of the air passing through it in time t?
  2. What is the kinetic energy of the air?
  3. Assume that the windmill converts 25% of the wind’s energy into electrical energy, and that A = 30 m2, v = 36 km/h and the density of air is 1.2 kg m–3. What is the electrical power produced?

A family uses 8 kW of power.

  1. Direct solar energy is incident on the horizontal surface at an average rate of 200 W per square meter. If 20% of this energy can be converted to useful electrical energy, how large an area is needed to supply 8 kW?
  2. Compare this area to that of the roof of a typical house.

Two coolies A and B do some work in time 1 minute and 2 minute respectively. The power spent is


If a 1200 W electric iron is used daily for 30 minutes, how much total electricity is consumed in the month of April?


Define power.


A wind-powered generator converts wind energy into electric energy. Assume that the generator converts a fixed fraction of the wind energy intercepted by its blades into electrical energy. For wind speed v, the electrical power output will be proportional to ______


A quarter horse power motor runs at a speed of 600 r.p.m. Assuming 40% efficiency, the work done by the motor in one rotation will be


An engine pumps up 200 kg of water through a height of 20 m in 10 seconds. If the efficiency of the engine is 80%. Calculate the power of the engine.


Water falls from a height of 60 m at the rate of 15 kg/s to operate a turbine. The losses due to frictional force are 10% of the input energy. How much power is generated by the turbine? (g = 10 m/s2)  


Unit of power used in mechanical engineering is ______.


Share
Notifications

Englishहिंदीमराठी


      Forgot password?
Use app×