Advertisements
Advertisements
प्रश्न
Which of the following is the most likely temperature of the filament of an electric light bulb when it is working on the normal 220 V supply line?
(a) 500°C
(b) 1500°C
(c) 2500°C
(d) 4500°C
Advertisements
उत्तर
(c) 2500°C
It is the temperature of an electric bulb filament when it glows.
APPEARS IN
संबंधित प्रश्न
Define watt. Write down an equation linking watts, volts and amperes.
A bulb is rated as 250 V; 0.4 A. Find its : (i) power, and (ii) resistance.
How many joules of electrical energy are transferred per second by a 6 V; 0.5 A lamp?
(a) 30 J/s
(b) 12 J/s
(c) 0.83 J/s
(d) 3 J/s
Electrical power P is given by the expression P = (Q × V) ÷ time. What do the symbols Q and V represent?
1Kwh =`( 1 "volt "xx 1 am pere xx.............)/1000`
Two resistors A and B of resistance 4 Ω and 6 Ω respectively are connected in parallel. The combination is connected across a 6 volt battery of negligible resistance. Calculate: (i) the power supplied by the battery, (ii) the power dissipated in each resistor.
A bulb with rating 250 V, 100 W is connected to a power supply of 220 V situated 10 m away using a copper wire of area of cross-section 5 mm2. How much power will be consumed by the connecting wires? Resistivity of copper = 1.7 × 10−8 Ωm
Which cable, one rated 15A and the other rated 5A will be thicker? Give a reason.
What are the two main systems of wiring commonly used in houses? Which of these systems mentioned by you is better and why?
What would happen and why, to an electric bulb when it is connected across a supply of voltage (i) lower (ii) higher than its proper rating?
How does the heat produced by die passage of current in a metallic wire depend on the current in the wire?
What do you understand by ‘earthing’? What are the advantages of earthing in a household electric circuit? Explain, how it is done?
An electric heater is rated 220 V, 550 W. Calculate the electrical energy consumed in 3 hours?
How does earthing prevent electrical shock?
At what voltage is the electric power generated at the generating station? Explain the transmission of this power to your house.
With reference to the diagram shown below calculate:
(i) The equivalent resistance between P and Q.
(ii) The reading of ammeter.
(iii) The electrical power between P and Q.
An electric kettle is rated 3kW, 250V. What should be the current capacity of the fuse with it?
If a heater coil rated lkW, 220 V is connected in series with an electric bulb of 100 W, 220 V and are supplied 200V, power consumed by the bulb in this circuit is ______.
