Advertisements
Advertisements
प्रश्न
Half mole of an ideal gas (γ = 5/3) is taken through the cycle abcda, as shown in the figure. Take `"R" = 25/3"J""K"^-1 "mol"^-1 `. (a) Find the temperature of the gas in the states a, b, c and d. (b) Find the amount of heat supplied in the processes ab and bc. (c) Find the amount of heat liberated in the processes cd and da.

Advertisements
उत्तर
Given:
Number of moles of the gas,
n = 0.5 mol

`"R" = 25/3 `J/mol -K
`gamma =5/3`
(a) Temperature at a = Ta
PaVa =nRTa
`=> "T""a" = ("P"_"a""V"_"a")/("n""R") = (100 xx 10^3 xx 5000 xx 10^-6)/(0.5 xx 25/3) = 120 "K"`
Similarly, temperature at b,
`"T"_"b" = ("P"_b"V"_"b")/("n""R")`
`"T"_"b" =( 100 xx 10^3 xx 10000 xx 10^-6)/(0.5 xx 25/3)`
Tb =240 K
Similarly, temperature at c is 480 K and at d is 240 K.
(b) For process ab,
dQ = ncpdT
[Since ab is isobaric]
`"d""Q" = 1/2 xx ("R"gamma)/(gamma-1) ("T"_"b" - "T"_"a")`
`"d""Q" =1/2 xx ((25 xx 5)/(3 xx 3))/(5/3 -1 ) xx (240 -120 )`
`"d""Q" = 1/2 xx 125 /9 xx 3/2 xx (120)`
dQ = 1250 J
For line bc, volume is constant. So, it is an isochoric process.
dQ = dU + dW
[dW = 0, isochoric process]
dQ = dU = nCvdT
dQ = nCv (Tc - Tb)
`"d""Q" = 1/2 xx ((25/3))/[[(5/3)-1]] xx (240)`
`"d""Q" = 1/2 xx 25/3 xx 3/2 xx 240 =1500 "J"`
(c) Heat liberated in cd (isobaric process),
dQ = − nCpdT
`"d""Q" = -1/2 xx( gamma "R")/(gamma-1) xx ("T"_d -"T"_"c")`
`"d""Q" = -1/2 xx 125/9 xx 3/2 xx ( 240 -480)`
`"d""Q" = -1/2 xx 125/6 xx 240 = 2500 "J"`
Heat liberated in da (isochoric process),
⇒ dQ = dU
Q= −nCvdT
`"d""Q" = -1/2 xx "R" /(gamma -1 )("T"_"a"-"T"_"d")`
`"d""Q" = -1/2 xx 25/2 xx (120-240)`
`"d""Q" = 25/4 xx 120 =750 "J"`
APPEARS IN
संबंधित प्रश्न
The energy of a given sample of an ideal gas depends only on its
Keeping the number of moles, volume and temperature the same, which of the following are the same for all ideal gases?
The average momentum of a molecule in a sample of an ideal gas depends on
Consider the quantity \[\frac{MkT}{pV}\] of an ideal gas where M is the mass of the gas. It depends on the
A sample of 0.177 g of an ideal gas occupies 1000 cm3 at STP. Calculate the rms speed of the gas molecules.
An ideal gas is taken through a process in which the pressure and the volume are changed according to the equation p = kV. Show that the molar heat capacity of the gas for the process is given by `"C" ="C"_"v" +"R"/2.`
An ideal gas (Cp / Cv = γ) is taken through a process in which the pressure and the volume vary as p = aVb. Find the value of b for which the specific heat capacity in the process is zero.
Two ideal gases have the same value of Cp / Cv = γ. What will be the value of this ratio for a mixture of the two gases in the ratio 1 : 2?
Consider a given sample of an ideal gas (Cp/Cv = γ) having initial pressure p0 and volume V0. (a) The gas is isothermally taken to a pressure p0/2 and from there, adiabatically to a pressure p0/4. Find the final volume. (b) The gas is brought back to its initial state. It is adiabatically taken to a pressure p0/2 and from there, isothermally to a pressure p0/4. Find the final volume.
Two vessels A and B of equal volume V0 are connected by a narrow tube that can be closed by a valve. The vessels are fitted with pistons that can be moved to change the volumes. Initially, the valve is open and the vessels contain an ideal gas (Cp/Cv = γ) at atmospheric pressure p0 and atmospheric temperature T0. The walls of vessel A are diathermic and those of B are adiabatic. The valve is now closed and the pistons are slowly pulled out to increase the volumes of the vessels to double the original value. (a) Find the temperatures and pressures in the two vessels. (b) The valve is now opened for sufficient time so that the gases acquire a common temperature and pressure. Find the new values of the temperature and pressure.
An ideal gas of density 1.7 × 10−3 g cm−3 at a pressure of 1.5 × 105 Pa is filled in a Kundt's tube. When the gas is resonated at a frequency of 3.0 kHz, nodes are formed at a separation of 6.0 cm. Calculate the molar heat capacities Cp and Cv of the gas.
A cubic vessel (with faces horizontal + vertical) contains an ideal gas at NTP. The vessel is being carried by a rocket which is moving at a speed of 500 ms–1 in vertical direction. The pressure of the gas inside the vessel as observed by us on the ground ______.
ABCDEFGH is a hollow cube made of an insulator (Figure). Face ABCD has positive charge on it. Inside the cube, we have ionized hydrogen. The usual kinetic theory expression for pressure ______.

- will be valid.
- will not be valid since the ions would experience forces other than due to collisions with the walls.
- will not be valid since collisions with walls would not be elastic.
- will not be valid because isotropy is lost.
Diatomic molecules like hydrogen have energies due to both translational as well as rotational motion. From the equation in kinetic theory `pV = 2/3` E, E is ______.
- the total energy per unit volume.
- only the translational part of energy because rotational energy is very small compared to the translational energy.
- only the translational part of the energy because during collisions with the wall pressure relates to change in linear momentum.
- the translational part of the energy because rotational energies of molecules can be of either sign and its average over all the molecules is zero.
In a diatomic molecule, the rotational energy at a given temperature ______.
- obeys Maxwell’s distribution.
- have the same value for all molecules.
- equals the translational kinetic energy for each molecule.
- is (2/3)rd the translational kinetic energy for each molecule.
When an ideal gas is compressed adiabatically, its temperature rises: the molecules on the average have more kinetic energy than before. The kinetic energy increases ______.
- because of collisions with moving parts of the wall only.
- because of collisions with the entire wall.
- because the molecules gets accelerated in their motion inside the volume.
- because of redistribution of energy amongst the molecules.
We have 0.5 g of hydrogen gas in a cubic chamber of size 3 cm kept at NTP. The gas in the chamber is compressed keeping the temperature constant till a final pressure of 100 atm. Is one justified in assuming the ideal gas law, in the final state?
(Hydrogen molecules can be consider as spheres of radius 1 Å).
