हिंदी
तमिलनाडु बोर्ड ऑफ सेकेंडरी एज्युकेशनएचएससी विज्ञान कक्षा १२

Give any one definition of power factor.

Advertisements
Advertisements

प्रश्न

Give any one definition of power factor.

परिभाषा
Advertisements

उत्तर

The Power Factor is the ratio of True Power (measured in Watts) to Apparent Power (measured in Volt-Amperes) in an AC circuit.

Power factor (cos Φ) = `"True power"/"Apparent power"`

shaalaa.com
  क्या इस प्रश्न या उत्तर में कोई त्रुटि है?
अध्याय 4: Electromagnetic Induction And Alternating Current - Evaluation [पृष्ठ २६०]

APPEARS IN

सामाचीर कलवी Physics - Volume 1 and 2 [English] Class 12 TN Board
अध्याय 4 Electromagnetic Induction And Alternating Current
Evaluation | Q II. 20. | पृष्ठ २६०

संबंधित प्रश्न

Obtain an expression for average power dissipated in a purely resistive A.C. circult. 


In a series LCR circuit, the phase difference between the voltage and the current is 45°. Then the power factor will be ______.


(a) An emf e = e0 sin ωt applied to a series L - C - R circuit derives a current I = I0sinωt in the circuit. Deduce the expression for the average power dissipated in the circuit.
(b) For circuits used for transporting electric power, a low power factor implies large power loss in transmission. Explain.


An AC source generating a voltage e = e0sinωt is connected to a capacitor of capacitance C. Find the expression for the current i flowing through it. Plot a graph of e and i versus ωt.


A light bulb is rated 100W for 220 V AC supply of 50 Hz. Calculate

  1. resistance of the bulb.
  2. the rms current through the bulb

L-C-R series circuit contains a resistance of 10 Ω and self-inductance 0.4 H connected in series with variable capacitor across 60 V and 50 Hz supply. The value of capacity at resonance will be π2 = 10.


In series LCR circuit, resistance is 18 `Omega` and impedance is 33 `Omega`. An r.m.s. voltage of 220 V is applied across the circuit. The true power consumed in a.c. circuit is ____________.


The voltage gain of a CE amplifier is 50. A sinusoidal ac of amplitude 10 mV is applied as a signal. The output of the amplifier will be ______.


In a series LR circuit XL = R and power factor of the circuit is P1. When capacitor with capacitance C such that XL= XC is put in series, the power factor becomes P2. The ratio `"P"_1/"P"_2` is ______. 


In an a.c. circuit, voltage and current are given by:

V = 100 sin (100 t) V and I = `100 sin (100 t + pi/3)` mA respectively.

The average power dissipated in one cycle is:


Share
Notifications

Englishहिंदीमराठी


      Forgot password?
Use app×