Advertisements
Advertisements
प्रश्न
Four children measure the length of a table which was about 2 m. Each of them used different ways to measure it.
- Sam measured it with a half metre long thread.
- Gurmeet measured it with a 15 cm scale from her geometry box.
- Reena measured it using her hand span.
- Salim measured it using a 5 m long measuring tape.
Which one of them would get the most accurate length? Give reason for your answer.
Advertisements
उत्तर
Salim would get the most accurate length because he is using a 5 m long measuring tape which is longer than the table. So, he can measure the length of the table in one go accurately. While in the other cases the chance of making an error is higher due to multiple measurements. In case of Sam, only that lengths can be measured which are exact multiples of half a metre.
APPEARS IN
संबंधित प्रश्न
Describe in steps how would you measure the length of a pencil using a metre rule. Draw a diagram if necessary.
Name the device used to measure the following:
Size of your shoulder.
Name the device used to measure the following:
Your weight.
Name the device used to measure the following:
Cloth for a curtain.
State two precautions to be observed while measuring length with the help of a metre scale.
Match the following:
| 1. | Length | a. | Litre |
| 2. | Mass | b. | Seconds |
| 3. | Time | c. | Kilogram |
| 4. | Volume of liquid | d. | Metre |
Four pieces of wooden sticks A, B, C and D are placed along the length of 30 cm long scale as shown in the following figure. Which one of them is 3.4 cm in length?
Which of the following figure shows the correct placement of a block along a scale for measuring its length?
You are provided three scales A, B and C as shown in the following figure to measure a length of 10 cm.
For the correct measurement of the length you will use the scale
SI unit of length is ______.
