हिंदी

Calculate the Quality Factor of a Series Lcr Circuit with L = 4.0 H, C = 1, μF and R = 20 ω. Mention the Significance of Quality Factor in Lcr Circuit. - Physics

Advertisements
Advertisements

प्रश्न

Calculate the quality factor of a series LCR circuit with L = 4.0 H, C = 1, μF and R = 20 Ω.

Mention the significance of quality factor in LCR circuit.

Advertisements

उत्तर

The quality factor (Q) of a series LCR circuit is mathematically given as

`Q =1/R sqrt(L/C)`

here

R = resistance = 20Ω

L = inductance = 4.0 H

C = Capacitance = 1μF = 10−6F

So, the quality factor relation can be rewritten as

`Q = 1/20 xx (9/(10^-6))^(1/2)`

or

`Q = 1/20 xx 2 xx 10^3`

So, the quality factor of the given series LCR combination is

`Q=100`

The quality factor is defined as the ratio of voltage drop across the inductor or capacitor to that of applied voltage. It measures the sharpness of resonance of an LCR circuit.

shaalaa.com
  क्या इस प्रश्न या उत्तर में कोई त्रुटि है?
2011-2012 (March) Foreign Set 2

वीडियो ट्यूटोरियलVIEW ALL [3]

संबंधित प्रश्न

Discuss the composition of two S.H.M.s along the same path having same period. Find the resultant amplitude and intial phase.


A 10 μF capacitor is charged to a 25 volt of potential. The battery is disconnected and a pure 100 m H coil is connected across the capacitor so that LC oscillations are set up. Calculate the maximum current in the coil.


A charged 10 microfarad capacitor is connected to an 81 mH inductor. What is the angular frequency of free oscillations of the circuit?  


When a capacitor connected with coil is completely discharged, then ____________.


The frequency of the output signal becomes ____________ times by doubling the value of the capacitance in the LC oscillator circuit.


The oscillation in L.C. circuit is produced due to ____________.


Electrical oscillations of desired frequency can be obtained by ______.


An LC circuit contains a 20 mH inductor and a 50 µF capacitor with an initial charge of 10 mC. The resistance of the circuit is negligible. Let the instant the circuit is closed be t = 0.

(a) What is the total energy stored initially? Is it conserved during LC oscillations?

(b) What is the natural frequency of the circuit?

(c) At what time is the energy stored
(i) completely electrical (i.e., stored in the capacitor)?
(ii) completely magnetic (i.e., stored in the inductor)?

(d) At what times is the total energy shared equally between the inductor and the capacitor?

(e) If a resistor is inserted in the circuit, how much energy is eventually dissipated as heat?


When a charged condenser is allowed to discharge through the inductor the electrical oscillations are produced called ______


An inductor coil, capacitor, and an A.C. source of rms voltage 24 V are connected in series. When the frequency of the source is varied, a maximum rms current of 6.0 A is observed. If this inductor coil is connected to a battery of emf 12 V and of internal resistance 4Ω, the current will be ______ Amp.


Share
Notifications

Englishहिंदीमराठी


      Forgot password?
Use app×