Advertisements
Advertisements
प्रश्न
Answer the following question.
Which materials can be used as thermal insulators and why?
Advertisements
उत्तर
- Substances such as glass, wood, rubber, plastic, etc. can be used as thermal insulators.
- These substances do not have free electrons to conduct heat freely throughout the body. Hence, they are poor conductors of heat.
APPEARS IN
संबंधित प्रश्न
Answer the following question.
Explain the term 'steady state'.
Answer the following question.
Derive its expression for the coefficient of thermal conductivity.
Answer the following question.
Give any four applications of thermal conductivity in everyday life.
Answer the following question.
Explain the term thermal resistance. State its SI unit and dimensions.
Answer the following question.
How heat transfer occurs through radiation in absence of a medium?
Solve the following problem.
The rate of flow of heat through a copper rod with temperature difference 30 °C is 1500 cal/s. Find the thermal resistance of copper rod.
Solve the following problem.
An electric kettle takes 20 minutes to heat a certain quantity of water from 0 °C to boiling point. It requires 90 minutes to turn all the water at 100 °C into steam. Find the latent heat of vaporization. (Specific heat of water = 1 cal/g °C)
Solve the following problem.
Find the temperature difference between two sides of a steel plate 4 cm thick, when the heat is transmitted through the plate at the rate of 400 k cal per minute per square meter at a steady state. Thermal conductivity of steel is 0.026 kcal/m s K.
Liquid is filled in a vessel which is kept in a room with temperature 20° C. When the temperature of the liquid is 80° C, then it loses heat at the rate of 90 cal/s. What will be the rate of loss of heat when the temperature of the liquid is 40° C?
If 1 g of a steam which is at 100°C starts melting then how much ice will remain at 0° C? (Latent heat of ice = 80 cal/g and latent heat of steam= 540 cal/g)
Heat energy is incident on the surface at the rate of 1000 J/min. If the coefficient of absorption is 0.8 and the coefficient of reflection is 0.1 then heat energy transmitted by the surface in 5 minutes is ______.
A ring consisting of two parts ADB and ACB of same conductivity K carries an amount of heat H. The ADB part is now replaced with another metal keeping the temperatures T1 and T2 constant. The heat carried increases to 2H. What should be the conductivity of the new ADB part? (Given `"ACB"/"ADB"` = 3)
Two rectangular blocks A and B of different metals have same length and same area of cross-section. They are kept in such a way that their cross-sectional area touch each other. The temperature at one end of A is 100°C and that of B at the other end is 0°C. If the ratio of their thermal conductivity is 1 : 3, then under steady state, the temperature of the junction in contact will be ______.
An electric heater is used in a room with a total wall area of 137 m2 to maintain a temperature of +20°C inside it when the outside temperature is -10°C. The walls have three different layers of materials. The innermost layer is of wood of thickness 2.5 cm, the middle layer is of cement of thickness 1.0 cm and the outermost layer is brick of 25.0 cm. The power of the electric heater will be ______ W. Assume that there is no heat loss through the floor and the ceiling. The thermal conductivities of wood, cement, and brick are 0.125, 1.5, and 1.0 watt/m/°C respectively.
In the amount of water of mass 20 g at 0°C is mixed with 40 g of water at 10°C, the final temperature of the mixture is ______.
Two rods of the same material, same length and same radius transfer a given amount of heat in t second when they are joined end-to-end. When the rods are joined one above the other, then they will transfer the same heat in the same conditions in time ______.
Through which mode does heat transfer take place in solids?
In which mode of heat transfer do the molecules physically move from one place to another?
At what speed do electromagnetic waves travel in space during radiation?
Which of the following correctly arranges the three modes of heat transfer from slowest to fastest?
Three identical heat conducting rods are connected in series as shown in the figure. The rods on the sides have thermal conductivity 2K while that in the middle has thermal conductivity K. The left end of the combination is maintained at temperature 3T and the right end the at T. The rods are thermally insulated from outside. In steady state, temperature at the left junction is T1 and that the right junction is T2. The ratio T1/2 T is:
