हिंदी

An Immersion Rod Having Resistance of 50 ω is Connected to 220v Main Supply. Assuming that All the Energy Generated Goes to Heat the Water,

Advertisements
Advertisements

प्रश्न

An immersion rod having resistance of 50 Ω is connected to 220V main supply. Assuming that all the energy generated goes to heat the water, calculate the time taken to heat 5 kg water from 30°C to 100°C.

संक्षेप में उत्तर
Advertisements

उत्तर

We know that  P = VI

∴ I = `"P"/"V" = 220/50 = 4.4`

Heat produced in an immersion heater

H = I2Rt

H = (4.4)2 × 50 × t

H = 968 t Joules

and Heat needed = mcθ

where C is the sp. heat capacity of water

= 4.2 × 103 J/kgC = 5 × 4.2 × 103 × (100 - 30)

= 5 × 4.2 × 103 × 70 = 1470000 J.

But Heat lost = Heat gained

968 t = 1470000

t = `1470000/968`

t = 1518.59 secs

t = 1518.6 secs

t = 25.326 min.

t = 25.33 mins.

shaalaa.com
  क्या इस प्रश्न या उत्तर में कोई त्रुटि है?

संबंधित प्रश्न

An electric heater is rated at 2 kW. Electrical energy costs Rs 4 per kWh. What is the cost of using the heater for 3 hours?

(a) Rs 12
(b) Rs 24
(c) Rs 36
(d) Rs 48


An electrical appliance having a resistance of 200Ω is operated at 200 V. Calculate the energy consumed by the appliance in 5 minutes (i) in joules (ii) in kWh.


A servo voltage stabiliser restricts the voltage output to 220 V ± 1%. If an electric bulb rated at 220 V, 100 W is connected to it, what will be the minimum and maximum power consumed by it?


Can you produce electricity from magnetism?

How does earthing prevent electrical shock?


You are required to connect a bulb, a fan and a socket outlet to the mains in one set A and an air-conditioner and a refrigerator to the mains in other set B. Will you recommend the wire of same thickness and same insulation in both? explain your answer.


How is the amount of heat produced calculated due to the passage of current in a metallic conductor? Derive an expression for it.


Three 250 W heaters are connected in parallel to a 100 V supply, Calculate total current taken from the supply.


Two resistances R1 = 4Ω and R2 = 6Ω are connected in series. The combination is connected with a battery of e.m.f. 6V and negligible resistance. Calculate:
(i) the heat produced per minute in each resistor,
(ii) the power supplied by the battery.


A consumer uses 4 lamps of 60 watt, 2 lamps of 40 watt, and 2 lamps of 100 watt. All these are used for 6 hour daily. Find the total bill for 30 days when the rate of energy is 75 paise per unit and the meter rent is Rs. 1.


Share
Notifications

Englishहिंदीमराठी


      Forgot password?
Use app×