हिंदी

A Light Bulb is Rated 100 W for 220 V Ac Supply of 50 Hz. Calculate (I) the Resistance of the Bulb; (Ii) the Rms Current Through the Bulb. - Physics

Advertisements
Advertisements

प्रश्न

A light bulb is rated 100 W for 220 V ac supply of 50 Hz. Calculate

(i) The resistance of the bulb;

(ii) The rms current through the bulb.

Advertisements

उत्तर

P = 100 W Vrms = 220 V

(a) Resistance, R

`=V_(rms)^2/P = (220 xx 220)/100 Ω =484Omega`

(b) P = Irms Vrms

`I_(rmo) =P/V_(rms) = (100W)/(220V)` = 0.45A

shaalaa.com
  क्या इस प्रश्न या उत्तर में कोई त्रुटि है?
2011-2012 (March) All India Set 1

वीडियो ट्यूटोरियलVIEW ALL [2]

संबंधित प्रश्न

You are given three circuit elements X, Y and Z. When the element X is connected across an a.c. source of a given voltage, the current and the voltage are in the same phase. When the element Y is connected in series with X across the source, voltage is ahead of the current in phase by π/4 . But the current is ahead of the voltage in phase by π/4when Z is connected in series with X across the source. Identify the circuit elements X, Y and Z. When all the three elements are connected in series across the same source, determine the impedance of the circuit.Draw a plot of the current versus the frequency of applied source and mention the significance of this plot.


An inductor L of inductance XL is connected in series with a bulb B and an ac source. How would brightness of the bulb change when (i) number of turn in the inductor is reduced, (ii) an iron rod is inserted in the inductor and (iii) a capacitor of reactance XC = XL is inserted in series in the circuit? Justify your answer in each case.


A light bulb and a solenoid are connected in series across an ac source of voltage. Explain, how the glow of the light bulb will be affected when an iron rod is inserted in the solenoid.


 A light bulb is rated at 100 W for a 220 V a.c. supply. Calculate the resistance of the bulb.


What is the reactance of a capacitor connected to a constant DC source?


When the frequency of the AC source in an LCR circuit equals the resonant frequency, the reactance of the circuit is zero. Does it mean that there is no current through the inductor or the capacitor?


The potential difference across the resistor is 160 V and that across the inductor is 120 V. Find the effective value of the applied voltage. If the effective current in the circuit is 1⋅0 A, calculate the total impedance of the circuit.


A series combination of an inductor (L), capacitor (C) and a resistor (R) is connected across an ac source of emf of peak value E0, and angular frequency (ω). Plot a graph to show variation of impedance of the circuit with angular frequency (ω).


Which of the following graphs represents the correct variation of inductive reactance XL with frequency u?


In a pure capacitive circuit if the frequency of ac source is doubled, then its capacitive reactance will be ______.


Share
Notifications

Englishहिंदीमराठी


      Forgot password?
Use app×