Advertisements
Advertisements
प्रश्न
A current passes through a resistor. Let K1 and K2 represent the average kinetic energy of the conduction electrons and the metal ions, respectively.
विकल्प
K2 < K2
K1 = K2
K1 > K2
Any of these three may occur
Advertisements
उत्तर
K1 > K2
The metal ions are bound at their positions and vibrate due to collisions with electrons and due to thermal energy. The conduction electrons are free to move. They get energy from the electric field set inside the conductor by connection with a battery and due to thermal motion. The velocity of the electrons is high.
Thus, the kinetic energy of the electrons is greater than the kinetic energy of the metal ions.
APPEARS IN
संबंधित प्रश्न
Which uses more energy, a 250 W TV set in 1 hr, or a 1200 W toaster in 10 minutes?
What is consumed using different electrical appliances, for which electricity bills are paid?
Name two safety devices which are connected to the live wire of a household electric circuit
An electric motor takes 5 amperes current form a 220 volt supply line. Calculate the power of the motor and electric energy consumed by it in 2 hours.
At a given time, a house is supplied with 100 A at 220 V. How many 75 W, 220 V light bulb could be switched on in the house at the same time (if they are all connected in parallel)?
A servo voltage stabiliser restricts the voltage output to 220 V ± 1%. If an electric bulb rated at 220 V, 100 W is connected to it, what will be the minimum and maximum power consumed by it?
A simple electric circuit has a 30 V battery and a resistor ot 60 o. What will be the current in the circuit? The resistance of the oonnecting wires is negligible.
An electric bulb of resistance 500 Ω draws current 0.4 A from the source. Calculate:
- the power of bulb and
- the potential difference at its end.
State relative advantages and disadvantages of ring system of wiring over the tree system.
An electric bulb is rated 240V-60W and is working at 100% efficiency.
(i) Calculate the resistance of bulb.
(ii) (a) Draw the circuit diagram.
(b) What is the rate of conversion of energy in each bulb?
(c) Total power used by the bulbs.
What is the resistance of an appliance rated at V volt, P watt?
Find the heat produced in joules when a current of 10 amperes flows through a connecting wire of resistance 2 × 10-2 ohms and heating element of resistance 250 ohms for 2 seconds.
The resistance of filament of an electric heater is 500 Ω It is operated at 200V for 1 hour daily. Calculate the current drawn by the heater and the energy consumed in kWh, by the heater in a month of 30 days.
What is the commercial unit of electrical energy?
What is the commercial unit of electrical energy? Represent it in terms of joules.
The electrical power and current in the circuit relates by ______
Using a long extension cord in which each conductor has a resistance of 8Ω, a bulb marked as '100 W, 200 V' is connected to a 220 V dc supply of negligible internal resistance as shown in the figure. The power delivered to the bulb is ______ W.
A fuse is rated 5 A. Can it be used with a geyser rated 1540 W, 220 V Write Yes or No. Give supporting calculations to justify your answer.
1 kWh = ______ J.
