Advertisements
Advertisements
प्रश्न
Differentiate between
Agriculture and Mining
Advertisements
उत्तर
| Sr. No. | Agriculture | Mining |
| 1. | Major physical factors that influence agriculture are climate, topography, soil and biotic factors | Mining activity solely depends on the presence of minerals. It is not directly related to latitude. |
| 2. | The economic and social factors such as labour, market, capital, transportation facilities, storage facilities, government policies, population, ownership of land, etc. also influence the development of agriculture. | The factors such as value of minerals, capital investment, technology, skilled labour, etc. also influence mining activities. Improved transportation facilities are very crucial for the development of mining. |
| 3. | Various technology like green houses, poly houses are used in agriculture. Similarly, highyielding seeds, fertilizers and insecticides are also used for increasing production. | Due to mechanisation, mining activity has developed on a large scale. Man has even stared exploiting the mineral oil and natural gas reserves from sea and ocean beds. |
APPEARS IN
संबंधित प्रश्न
Describe the factors that affect mining activities.
What is the status of mining in the developed and developing economies of the world?
Which one of the following is not a method of mining?
Depending on the mode of occurrence and the nature of the ore, mining is of two types: Surface and underground mining. Surface mining is also known as open cast mining is the easiest and the cheapest way of mining minerals that occur close to the surface, overhead costs such as safety precautions and equipment are relatively low in this method. The output is both large and rapid. When the ore lies deep below the surface, an underground mining method (shaft method) has to be used. In this method, vertical shafts have to be sunk, from where underground galleries radiate to reach the minerals. Minerals are extracted and transported to the surface through these passages. It requires specially designed lifts, drills, haulage, vehicles, ventilation system for safe and efficient movement of people and materials. This method is risky. Poisonous gages, fires, floods, and cave-in bad to fatal accidents. The developed economies are retreating from mining, processing, and refining stages of production due to high labour costs, while the developing countries with large labour forces and striving for a higher standard of living are becoming more important. Several countries of Africa and a few of South America and Asia have over fifty per cent of the earnings from minerals alone.
Opencast mining is used for the minerals which ______
Depending on the mode of occurrence and the nature of the ore, mining is of two types: Surface and underground mining. Surface mining is also known as open cast mining is the easiest and the cheapest way of mining minerals that occur close to the surface, overhead costs such as safety precautions and equipment are relatively low in this method. The output is both large and rapid. When the ore lies deep below the surface, an underground mining method (shaft method) has to be used. In this method, vertical shafts have to be sunk, from where underground galleries radiate to reach the minerals. Minerals are extracted and transported to the surface through these passages. It requires specially designed lifts, drills, haulage, vehicles, ventilation system for safe and efficient movement of people and materials. This method is risky. Poisonous gages, fires, floods, and cave-in bad to fatal accidents. The developed economies are retreating from mining, processing, and refining stages of production due to high labour costs, while the developing countries with large labour forces and striving for a higher standard of living are becoming more important. Several countries of Africa and a few of South America and Asia have over fifty percent of the earnings from minerals alone.
Which method of mining is very risky?
Depending on the mode of occurrence and the nature of the ore, mining is of two types: Surface and underground mining. Surface mining is also known as open cast mining is the easiest and the cheapest way of mining minerals that occur close to the surface, overhead costs such as safety precautions and equipment are relatively low in this method. The output is both large and rapid. When the ore lies deep below the surface, an underground mining method (shaft method) has to be used. In this method, vertical shafts have to be sunk, from where underground galleries radiate to reach the minerals. Minerals are extracted and transported to the surface through these passages. It requires specially designed lifts, drills, haulage, vehicles, ventilation system for safe and efficient movement of people and materials. This method is risky. Poisonous gages, fires, floods, and cave-in bad to fatal accidents. The developed economies are retreating from mining, processing, and refining stages of production due to high labour costs, while the developing countries with large labour forces and striving for a higher standard of living are becoming more important. Several countries of Africa and a few of South America and Asia have over fifty percent of the earnings from minerals alone.
For which reasons fear of fatal accidents remain in underground mining?
Depending on the mode of occurrence and the nature of the ore, mining is of two types: Surface and underground mining. Surface mining is also known as open cast mining is the easiest and the cheapest way of mining minerals that occur close to the surface, overhead costs such as safety precautions and equipment are relatively low in this method. The output is both large and rapid. When the ore lies deep below the surface, an underground mining method (shaft method) has to be used. In this method, vertical shafts have to be sunk, from where underground galleries radiate to reach the minerals. Minerals are extracted and transported to the surface through these passages. It requires specially designed lifts, drills, haulage, vehicles, ventilation system for safe and efficient movement of people and materials. This method is risky. Poisonous gages, fires, floods, and cave-in bad to fatal accidents. The developed economies are retreating from mining, processing, and refining stages of production due to high labour costs, while the developing countries with large labour forces and striving for a higher standard of living are becoming more important. Several countries of Africa and a few of South America and Asia have over fifty percent of the earnings from minerals alone.
Developing economies are increasing mining, processing, and refinery stages of production because of ______
Depending on the mode of occurrence and the nature of the ore, mining is of two types: Surface and underground mining. Surface mining is also known as open cast mining is the easiest and the cheapest way of mining minerals that occur close to the surface, overhead costs such as safety precautions and equipment are relatively low in this method. The output is both large and rapid. When the ore lies deep below the surface, an underground mining method (shaft method) has to be used. In this method, vertical shafts have to be sunk, from where underground galleries radiate to reach the minerals. Minerals are extracted and transported to the surface through these passages. It requires specially designed lifts, drills, haulage, vehicles, ventilation system for safe and efficient movement of people and materials. This method is risky. Poisonous gages, fires, floods, and cave-in bad to fatal accidents. The developed economies are retreating from mining, processing, and refining stages of production due to high labour costs, while the developing countries with large labour forces and striving for a higher standard of living are becoming more important. Several countries of Africa and a few of South America and Asia have over fifty percent of the earnings from minerals alone.
Which method of mining is less risky?
Primary activity that is practised on a larger scale is
Read the following statements regarding open-cast mining and choose the correct option:
- This is the cheapest way of mining.
- The output is in large quantity.
- It requires specially designed lifts, drills.
- It requires special ventilation system.
