मराठी

An Electric Heater is Rated at 2 Kw. Electrical Energy Costs Rs 4 per Kwh. What is the Cost of Using the Heater for 3 Hours? (A) Rs 12 (B) Rs 24 (C) Rs 36 (D) Rs 48 - Science

Advertisements
Advertisements

प्रश्न

An electric heater is rated at 2 kW. Electrical energy costs Rs 4 per kWh. What is the cost of using the heater for 3 hours?

(a) Rs 12
(b) Rs 24
(c) Rs 36
(d) Rs 48

Advertisements

उत्तर

(b) Rs. 24
Electrical energy consumed in three hours = P x t = 2 kW x 3 hour = 6 kWh
Unit cost = Rs. 4 per kWh
Therefore, the cost of energy used for three hours = 4 x 6 = Rs. 24

shaalaa.com
  या प्रश्नात किंवा उत्तरात काही त्रुटी आहे का?
पाठ 1: Electricity - Exercise 7

APPEARS IN

व्हिडिओ ट्यूटोरियलVIEW ALL [1]

संबंधित प्रश्‍न

Which uses more energy, a 250 W TV set in 1 hr, or a 1200 W toaster in 10 minutes?


An electric motor takes 5 amperes current form a 220 volt supply line. Calculate the power of the motor and electric energy consumed by it in 2 hours.


What is the maximum power in kilowatts of the appliance that can be connected safely to a 13 A ; 230 V mains socket?


Define kilowatt-hour. 


 How many joules are there in one kilowatt-hour?


An electric kettle for use on a 230 V supply is rated 3000 W. For safe working, the cable connected to it should be able to carry at least: 

(a) 2 A
(b) 5 A
(c) 10 A
(d) 15 A


State whether an electric heater will consume more electrical energy or less electrical energy per second when the length of its heating element is reduced. Give reasons for your answer.


When a current of 4.0 A passes through a certain resistor for 10 minutes, 2.88 × 10J of heat are produced. Calculate

 the power of the resistor.
 the voltage across the resistor.


An electric heater of resistance 8 Ω takes a current of 15 A from the mains supply line. Calculate the rate at which heat is developed in the heater. 

 


The coil of an electric bulb takes 40 watts to start glowing. If more than 40 W are supplied, 60% of the extra power is converted into light and the remaining into heat. The bulb consumes 100 W at 220 V. Find the percentage drop in the light intensity at a point if the supply voltage changes from 220 V to 200 V.


Fig . shows the essent ial features of a battery operated bell. The hammer strikes the gong when the swi tch is closed . State and explain the effect of using the following material successively to form the core.

(a) Plastic
(b) Steel
(c) Copper


What does the unit kilowatt hour measure? Define it.


Why does not the heating coil produce any visible light? in an electric stove.


Two electric lamps each rating 100 W, 110 V are connected in series to a 220 V power supply and two other electric lamps each of marking 100 W, 220 V are connected in parallel to the same power supply. Will anyone of the two combinations give more light than the other? Give a reason for your answer.


Three 250 W heaters are connected in parallel to a 100 V supply, Calculate total current taken from the supply.


An electric iron is rated at 230 V, 750 W. What is its resistance? What maximum current can be passed through it?


Two bulbs are rated: bulb A 100W, 120 V bulb B 10W, 120 V. If both are connected across a 120V supply, which bulb will consume more energy, When in series? Also calculate the current through each bulb in above cases.


The resistance of filament of an electric heater is 500 Ω It is operated at 200V for 1 hour daily. Calculate the current drawn by the heater and the energy consumed in joule.


Electric power is inversely proportional to ____________.


The electrical power and current in the circuit relates by ______


Share
Notifications

Englishहिंदीमराठी


      Forgot password?
Use app×