Advertisements
Advertisements
प्रश्न
Write the control limits for the mean chart
Advertisements
उत्तर
The calculation of control limits for `bar"X"` chart in two different cases are
| Case (i) When `bar"X"` and SD are given |
Case (ii) When `bar"X"` and SD are not given |
|
UCL `\overset{==}{"X"} + sigma/sqrt("n")` CL = `\overset{==}{"X"}` LCL = `\overset{==}{"X"} - 3 sigma/sqrt("n")` |
UCL = `\overset{==}{"X"} + "A"_2 bar"R"` CL = `\overset{==}{"X"}` LCL = `\overset{==}{"X"} - "A"_2bar"R"` |
APPEARS IN
संबंधित प्रश्न
Define Statistical Quality Control
Construct `bar"X"` and R charts for the following data:
| Sample Number | Observations | ||
| 1 | 32 | 36 | 42 |
| 2 | 28 | 32 | 40 |
| 3 | 39 | 52 | 28 |
| 4 | 50 | 42 | 31 |
| 5 | 42 | 45 | 34 |
| 6 | 50 | 29 | 21 |
| 7 | 44 | 52 | 35 |
| 8 | 22 | 35 | 44 |
(Given for n = 3, A2 = 1.023, D3 = 0 and D4 = 2.574)
The following data show the values of sample mean `(bar"X")` and its range (R) for the samples of size five each. Calculate the values for control limits for mean, range chart and determine whether the process is in control.
| Sample Number | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 |
| Mean | 11.2 | 11.8 | 10.8 | 11.6 | 11.0 | 9.6 | 10.4 | 9.6 | 10.6 | 10.0 |
| Range | 7 | 4 | 8 | 5 | 7 | 4 | 8 | 4 | 7 | 9 |
(conversion factors for n = 5, A2 = 0.58, D3 = 0 and D4 = 2.115)
A quality control inspector has taken ten samples of size four packets each from a potato chips company. The contents of the sample are given below, Calculate the control limits for mean and range chart.
| Sample Number | Observations | |||
| 1 | 2 | 3 | 4 | |
| 1 | 12.5 | 12.3 | 12.6 | 12.7 |
| 2 | 12.8 | 12.4 | 12.4 | 12.8 |
| 3 | 12.1 | 12.6 | 12.5 | 12.4 |
| 4 | 12.2 | 12.6 | 12.5 | 12.3 |
| 5 | 12.4 | 12.5 | 12.5 | 12.5 |
| 6 | 12.3 | 12.4 | 12.6 | 12.6 |
| 7 | 12.6 | 12.7 | 12.5 | 12.8 |
| 8 | 12.4 | 12.3 | 12.6 | 12.5 |
| 9 | 12.6 | 12.5 | 12.3 | 12.6 |
| 10 | 12.1 | 12.7 | 12.5 | 12.8 |
(Given for n = 5, A2 = 0.58, D3 = 0 and D4 = 2.115)
Choose the correct alternative:
Variations due to natural disorder is known as
Choose the correct alternative:
The assignable causes can occur due to
Choose the correct alternative:
A typical control charts consists of
Choose the correct alternative:
R is calculated using
Choose the correct alternative:
The LCL for R chart is given by
From the following data, calculate the control limits for the mean and range chart.
| Sample No. | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 |
| Sample Observations |
50 | 21 | 50 | 48 | 46 | 55 | 45 | 50 | 47 | 56 |
| 55 | 50 | 53 | 53 | 50 | 51 | 48 | 56 | 53 | 53 | |
| 52 | 53 | 48 | 50 | 44 | 56 | 53 | 54 | 549 | 55 | |
| 49 | 50 | 52 | 51 | 48 | 47 | 48 | 53 | 52 | 54 | |
| 54 | 46 | 47 | 53 | 47 | 51 | 51 | 47 | 54 | 52 |
