Advertisements
Advertisements
प्रश्न
Write an equation that shows the relationship between molar conductivity and degree of dissociation of weak electrolyte.
Advertisements
उत्तर
The relationship between molar conductivity (∧c) and degree of dissociation (α) of weak electrolyte is given as
`alpha = Λ_"c"/Λ_0`
where, Λ0 = Limiting molar conductivity
APPEARS IN
संबंधित प्रश्न
0.05 M NaOH solution offered a resistance of 31.6 Ω in a conductivity cell at 298 K. If the cell constant of the cell is 0.367 cm-1, calculate the molar conductivity of NaOH solution.
The molar conductivity of 0.05 M BaCl2 solution at 25° C is 223Ω-1 cm2 mol-1. What is its conductivity?
Choose the most correct option.
Two solutions have the ratio of their concentrations 0.4 and ratio of their conductivities 0.216. The ratio of their molar conductivities will be ______.
Answer the following in one or two sentences.
Write the relationship between conductivity and molar conductivity and hence unit of molar conductivity.
Answer the following in brief.
Explain the effect of dilution of the solution on conductivity.
The molar conductivity and conductivity of AgNO3 solution is 121.4 Ω–1 cm2 mol–1 and 2.428 × 10–3 Ω–1 cm–1 at 25 °C. What is molar concentration of AgNO3 solution?
Write three important steps required to determine molar conductivity.
Write relation between electrolytic conductivity and molar conductivity.
Molar conductance of BaCl2, H2SO4 and HCl at infinite dilution are X1, X2 and X3 respectively. Molar conductance of BaSO4 at infinite dilution is ____________.
The resistance of `1/10`M solution is 2.5 × 103 ohm. What is the molar conductivity of solution? (cell constant = 1.25 cm-1).
The conductivity of 0.02 M solution of NaCl is 2.6 × 10−2 S cm−1. What is its molar conductivity?
Which among the following solution has the highest conductivity (k) value?
The SI unit of resistivity and molar conductivity are respectively ____________.
The molar conductivities at infinite dilution for sodium acetate, HCI and NaCl are 91 S cm2 mol-1, 425.9 S cm2 mol-1 and 126.4 S cm2 mol-1 respectively. The molar conductivity of acetic acid at infinite dilution is ______.
In 2 hours, a certain current liberates 0.504 g hydrogen. How many grams of copper can be deposited by the same current flowing for the same time in a CuSO4 solution?
(Molar mass of Cu = 63.5 g mol−1, H2 = 2.0 g mol−1)
What is the relation between cell constant, conductivity and electrical resistance?
What is the value of cell constant if conductance and conductivity of a solution is same?
If the resistivity of 0.1 M KCI solution is 50 Ω cm, what is it's molar conductivity?
The value of [H3O+] in mol lit–1 of 0.001 M acetic acid solution (Ka = 1.8 × 10–5) is ______.
Specific conductance of 0.1 M sodium chloride solution is 1.06 × 10−2 ohm−1 cm−1. Its molar conductance in ohm−1 cm2 mol−1 is ______.
Molar conductivities at infinite dilution of Mg2+ and Br- are 105.8 Ω-1 cm2 mol-1 and 78.2 Ω-1 cm2 mol-1 respectively. Calculate molar conductivity at zero concentration of MgBr2.
A conductivity cell filled with 0.02 M AgNO3 gives at 25°C resistance of 947 ohms. If the cell constant is 2.3 cm-1, what is the molar conductivity of 0.02 M AgNO3 at 25°C?
Explain the determination of molar conductivity of a weak electrolyte at infinite dilution or zero concentration using Kohlrausch's law.
Define the term cell constant.
