Advertisements
Advertisements
प्रश्न
Select the correct option.
The pressure exerted by 50 kg (g = 10 m/s−2) on an area of cross-section of 2 m2 is
विकल्प
50 Pa
200 Pa
250 Pa
1000 Pa
Advertisements
उत्तर
250 Pa
Explanation: m = 50 kg; g = 10 ms−2
Area of cross-section = A = 2m2
Pressure = P = `"F"/"A"="mg"/"A"=(50xx10)/2` = 250 Pa
APPEARS IN
संबंधित प्रश्न
What should be the ratio of area of cross section of the master cylinder and wheel cylinder of a hydraulic brake so that a force of 15 N can be obtained at each of its brake shoe by exerting a force of 0.5 N on the pedal ?
If the mechanical advantage of the handle of the pump plunger is 8, calculate the force applied at the end of the handle of the pump plunger.
Select the correct option.
Pressure applied in liquids is transmitted with undiminished force
The following figure shows a manometer containing a liquid of density p. The limb P of the manometer is connected to a vessel V and the limb Q is open to atmosphere. The difference in the levels of liquid in the two limbs of the manometer is h as shown in the diagram. The atmospheric pressure is P0.
(i) What is the pressure on the liquid surface in the limb Q?
(ii) What is the pressure on the liquid surface in the limb P?
State two applications of Pascal's law.
What is the principle of a hydraulic machine?
State the principle on which Brahma press depends.
The density of iron is 7800 kg m-3. What do you mean by this statement? What is density of water at 40C?
Match the following:
| 1. | Hydraulic press | a. | Archimedes |
| 2. | Cartesian Diver | b. | Floatation |
| 3. | Hydrostatic Balance | c. | Pascal’s law |
| 4. | Hydrometer | d. | Buoyancy |
