हिंदी

A Washing Tub in the Shape of a Frustum of a Cone Has a Height of 21 Cm. the Radii of the Circular Top and Bottom Are 20 Cm and 15 Cm Respectively.What is the Capacity of the Tub? ( π = 22 7 ).

Advertisements
Advertisements

प्रश्न

A washing tub in the shape of a frustum of a cone has a height of 21 cm. The radii of the circular top and bottom are 20 cm and 15 cm respectively. What is the capacity of the tub? ( \[\pi = \frac{22}{7}\]).

योग
Advertisements

उत्तर

Radius of the circular top of washing tub, r1 = 20 cm
Radius of the circular bottom of washing tub, r2 = 15 cm
Height of the washing tub, h = 21 cm 
∴ Capacity of the washing tub = Volume of frustum of cone

\[= \frac{1}{3}\pi h\left( r_1^2 + r_1 r_2 + r_2^2 \right)\]
\[ = \frac{1}{3} \times \frac{22}{7} \times 21 \times \left( {20}^2 + 20 \times 15 + {15}^2 \right)\]
\[ = 22 \times \left( 400 + 300 + 225 \right)\]
\[ = 22 \times 925\]
\[ = 20350 {cm}^3\]

\[= \frac{20350}{1000} L \left( 1 L = 1000 {cm}^3 \right)\]
\[ = 20 . 35 L\]

Thus, the capacity of the tub is 20.35 litres.

shaalaa.com
  क्या इस प्रश्न या उत्तर में कोई त्रुटि है?
अध्याय 7: Mensuration - Problem set 7 [पृष्ठ १६१]

APPEARS IN

बालभारती Geometry Mathematics 2 [English] Standard 10 Maharashtra State Board
अध्याय 7 Mensuration
Problem set 7 | Q 2 | पृष्ठ १६१

वीडियो ट्यूटोरियलVIEW ALL [2]

संबंधित प्रश्न

A metallic right circular cone 20 cm high and whose vertical angle is 60° is cut into two parts at the middle of its height by a plane parallel to its base. If the frustum so obtained is drawn into a wire of diameter 1/16 cm, find the length of the wire [use π=22/7]


Derive the formula for the volume of the frustum of a cone.


A metallic bucket, open at the top, of height 24 cm is in the form of the frustum of a cone, the radii of whose lower and upper circular ends are 7 cm and 14 cm respectively. Find :
(i) the volume of water which can completely fill the bucket.
(ii) the area of the metal sheet used to make the bucket.
[Use π =\[\frac{22}{7}\]


A rectangular vessel of dimensions 20 cm × 16 cm × 11 cm is full of water. This water is poured into a conical vessel. The top of the conical vessel has its radius 10 cm. If the conical vessel is filled completely, determine its height.


A bucket is in the form of a frustum of a cone and holds 15.25 litres of water. The diameters of the top and bottom are 25 cm and 20 cm respectively. Find its height and area of tin used in its construction.


A cone of maximum size is carved out from a cube of edge 14 cm. Find the surface area of the cone and of the remaining solid left out after the cone carved out.


A hemisphere and a cone have equal bases. If their heights are also equal, then what is the ratio of their curved surfaces?


The material of a cone is converted into the shape of a cylinder of equal radius. If height of the cylinder is 5 cm, then height of the cone is


The curved surface area of a right circular cone of height 15 cm and base diameter 16 cm is


The radii of the circular ends of a frustum are 6 cm and 14 cm. If its slant height is 10 cm, then its vertical height is


The height and radius of the cone of which the frustum is a part are h1 and r1 respectively. If h2 and r2 are the heights and radius of the smaller base of the frustum respectively and h2 : h1 = 1 : 2, then r2 : r1 is equal to


A metalic solid cone is melted to form a solid cylinder of equal radius. If the height of the cylinder is 6 cm, then the height of the cone was


The radii of the circular ends of a solid frustum of a cone are 33 cm and 27 cm, and its slant height is 10 cm. Find its capacity and total surface area. `["Take"  π = 22/7.]`


The perimeters of the two circular ends of a frustum of a cone are 48 cm and 36 cm. If the height of the frustum is 11 cm, then find its volume and curved surface area.


A solid metallic right circular cone 20 cm high and whose vertical angle is 60°, is cut into two parts at the middle of its height by a plane parallel to its base. If the frustum so obtained be drawn into a wire of diameter `1/12` cm, then find the length of the wire.


An oil funnel made of tin sheet consists of a 10 cm long cylindrical portion attached to a frustum of a cone. If the total height is 22 cm, diameter of the cylindrical portion is 8 cm and the diameter of the top of the funnel is 18 cm, then find the area of the tin sheet required to make the funnel.


The diameters of two circular ends of a bucket are 44 cm and 24 cm, and the height of the bucket is 35 cm. The capacity of the bucket is ______.


A shuttle cock used for playing badminton has the shape of the combination of ______.


A bucket is in the form of a frustum of a cone and holds 28.490 litres of water. The radii of the top and bottom are 28 cm and 21 cm, respectively. Find the height of the bucket.


A milk container of height 16 cm is made of metal sheet in the form of a frustum of a cone with radii of its lower and upper ends as 8 cm and 20 cm respectively. Find the cost of milk at the rate of Rs. 22 per litre which the container can hold.


Share
Notifications

Englishहिंदीमराठी


      Forgot password?
Use app×