Solution - The Magnetic Induction at a Point Inside the Solenoid Along the Axis - Electromagnetic Induction



      Forgot password?

View all notifications
Books Shortlist
Your shortlist is empty


A solenoid of length 1.5 m and 4 cm in diameter possesses 10 turns per metre. A current of 5 A is flowing through it. The magnetic induction at a point inside the solenoid along the axis is ............................. .

0 = 4π × 10-7 Wb/Am)

  1. π  × 10-5 T
  2. 2π × 10-5 T
  3. 3π × 10-5 T
  4. 4π × 10-5 T


You need to to view the solution
Is there an error in this question or solution?

Appears in these question papers

Similar questions VIEW ALL

It is desired to measure the magnitude of field between the poles of a powerful loud speaker magnet. A small flat search coil of area 2 cm2 with 25 closely wound turns, is positioned normal to the field direction, and then quickly snatched out of the field region. Equivalently, one can give it a quick 90° turn to bring its plane parallel to the field direction). The total charge flown in the coil (measured by a ballistic galvanometer connected to coil) is 7.5 mC. The combined resistance of the coil and the galvanometer is 0.50 Ω. Estimate the field strength of magnet.

view solution

 Two circular coils A and B are placed closed to each other. If the current in the coil A is changed, will some current be induced in the coil B? Give reason.

view solution

The device used for producing electric current is called _________.

view solution

When a bar magnet is pushed towards (or away) from the coil connected to a galvanometer, the pointer in the galvanometer deflects. Identify the phenomenon causing this deflection and write the factors on which the amount and direction of the deflection depends. State the laws describing this phenomenon.

view solution

A line charge λ per unit length is lodged uniformly onto the rim of a wheel of mass and radius R. The wheel has light non-conducting spokes and is free to rotate without friction about its axis (Fig. 6.22). A uniform magnetic field extends over a circular region within the rim. It is given by,

= − B0 (≤ aR)

= 0 (otherwise)

What is the angular velocity of the wheel after the field is suddenly switched off?

view solution
Solution for question: The Magnetic Induction at a Point Inside the Solenoid Along the Axis concept: Electromagnetic Induction. For the courses 12th HSC Science (Computer Science), 12th HSC Science (Electronics), 12th HSC Science (General)