###### Advertisements

###### Advertisements

An ideal voltmeter has _______.

(A) low resistance

(b) high resistance

(C) infinite resistance

(D) zero resistance

###### Advertisements

#### Solution

(c) Infinite resistance

#### APPEARS IN

#### RELATED QUESTIONS

The combined resistance of a galvanometer of resistance 500Ω and its shunt is 21Ω. Calculate the value of shunt.

The combined resistance of a galvanometer of resistance 500Ω and its shunt is 21Ω. Calculate the value of shunt.

A rectangular coil of a moving coil galvanometer contains 50 turns each having area 12 cm2 . It is suspended in radial magnetic field 0.025 Wb/m^{2} by a fibre of twist constant 15 x10^{-10} Nm/degree. Calculate the sensitivity of the moving coil galvanometer.

Show that the current flowing through a moving coil galvanometer is directly proportional to the angle of deflection of coil.

Write the underlying principle of a moving coil galvanometer.

Obtain the expression for current sensitivity of moving coil galvanometer.

A circular coil of 250 turns and diameter 18 cm carries a current of 12A. What is the magnitude of magnetic moment associated with the coil?

Explain how moving coil galvanometer is converted into a voltmeter. Derive the necessary formula.

A rectangular coil of a moving coil galvanometer contains 100 turns, each having area

15 cm^{2}. It is suspended in the radial magnetic field 0.03 T. The twist constant of suspension

fibre is 15 x 10^{-10} N-m/degree. Calculate the sensitivity of the moving coil galvanometer.

The fraction of the total current passing through the galvanometer is ............ .

a) `S/(S+G)`

b) `G/(S+G)`

c) `(S+G)/G`

d) `(S+G)/S`

A moving coil galvanometer has a resistance of 25Ω and gives a full scale deflection for a current of 10mA. How will you convert it into a voltmeter having range 0 - 100 V?

A galvanometer has a resistance of 16Ω. It shows full scale deflection, when a current of 20 mA is passed through it. The only shunt resistance available is 0.06 which is not appropriate to convert a galvanometer into an ammeter. How much resistance should be connected in series with the coil of galvanometer, so that the range of ammeter is 8 A?

Why is it necessary to introduce a radial magnetic field inside the coil of a galvanometer?

Can a galvanometer as such be used for measuring the current? Explain.

How will you convert a moving coil galvanometer into a voltmeter?

Define the current sensitivity of a galvanometer ?

Draw a labelled diagram of a moving coil galvanometer and explain its working. What is the function of radial magnetic field inside the coil?

In the meter bridge experiment, balance point was observed at J with AJ = *l*.

**(i) **The values of R and X were doubled and then interchanged. What would be the new position of balance point?

**(ii) **If the galvanometer and battery are interchanged at the balance position, how will the alance point get affected?

State the underlying principle of working of a moving coil galvanometer. Write two reasons why a galvanometer can not be used as such to measure current in a given circuit. Name any two factors on which the current sensitivity of a galvanometer depends.

What are the advantages of using soft iron as a core, instead of steel, in the coils of galvanometers?

A coil of radius 10 cm and resistance 40 Ω has 1000 turns. It is placed with its plane vertical and its axis parallel to the magnetic meridian. The coil is connected to a galvanometer and is rotated about the vertical diameter through an angle of 180°. Find the charge which flows through the galvanometer if the horizontal component of the earth's magnetic field is B_{H} = 3.0 × 10^{−5} T.

Why are the pole pieces of a horseshoe magnet in a moving coil galvanometer made cylinder in shape?

A moving coil galvanometer has a coil of resistance 59 Ω. It shows a full-scale deflection for a current of 50 mA. How will you convert it to an ammeter having a range of 0 to 3A?

State how a moving coil galvanometer can be converted into an ammeter.

A galvanometer coil has a resistance of 15 Ω and the metre shows full scale deflection for a current of 4 mA. How will you convert the metre into an ammeter of range 0 to 6 A?

The AC voltage across a resistance can be measured using a ______.

The deflection in a moving coil galvanometer is ______.

The current sensitivity of a galvanometer increase by 20%. If its resistance also increases by 25%, the voltage sensitivity will ______.

A galvanometer of resistance 100 Ω gives a full-scale deflection for a current of 10^{−5 }A. To convert it into an ammeter capable of measuring up to 1 A we should connect a resistance of ______.

A galvanometer having a coil resistance of 60 Ω shows full-scale deflection when a current of 1.0 amp passes through it. It can be converted into an ammeter to read currents up to 5.0 amp by:

In an ammeter 0.5% of main current passes through galvanometer; If resistance of galvanometer is G, the resistance of ammeter will be.

The coil of galvanometer consists of 100 turns and effective area of 1 square cm. The restoring couple is 10^{-8} N-m/rad. The magnetic field between the pole pieces is 5T. The current sensitivity of this galvanometer will be ______.

A voltmeter of variable ranges 3 V, 15 V, 150 V is to be designed by connecting resistances R_{1}, R_{2,} R_{3} in series with a galvanometer of resistance G = 20 Ω, as shown in Fig. The galvanometer gives full pass through its coil for 1 mA current i.e. "gives full pass through it's coil for 1 mA current". Then, the resistances R_{1}, R_{2} and R_{3 }(in kilo ohms) should be, respectively:

When a galvanometer is shunted with a 4 Ω resistance, the deflection is reduced to one-fifth. If the galvanometer is further shunted with a 2 Ω wire. The further reduction (find the ratio of decrease in current to the previous current) in the deflection will be (the main current remains the same)

A galvanometer coil bas 500 turns and each tum has an average area of 3 × 10^{-4} m^{2}. If a torque of 1.5 Nm is required to keep this coil parallel to a magnetic field when a current of 0.5 A is flowing through it, the strength of the field (in T) is ______.

A galvanometer having a resistance of 20 Ω and 30 Ω division on both sides has figure of merit 0.005 ampere/division. The resistance that should be connected in series such that it can be used as a voltmeter upto 15 volt, is ______.

A moving coil galvanometer has 150 equal divisions. Its current sensitivity is 10-divisions per milliampere and voltage sensitivity is 2 divisions per millivolt. In order that each division reads 1 volt, the resistance in ohms needed to be connected in series with the coil will be ______.

Explain in brief the basic construction of a moving-coil table galvanometer whit a neat labelled diagram.

A resistance of 3Ω is connected in parallel to a galvanometer of resistance 297Ω. Find the fraction of current passing through the galvanometer.

A voltmeter has a range of 0 - 20 V and a resistance of 500 Q. Explain how can be used to measure voltages from 0 - 200 volt?

A moving coil galvanometer of resistance 55 Ω produces a full scale deflection for a current of 250 mA. How will you convert it into an ammeter with a range of 0 - 3A?

To convert a moving coil galvanometer into an ammeter we need to connect a ______.