1 A = 10^3 mA - Science and Technology 1

Advertisements
Advertisements

1 A = _________ mA

  1. 102
  2. 103
  3. 10-3
  4. 10-6
Advertisements

Solution

(b) 103 mA

1 ampere = 1000 mA = 103 mA

 

  Is there an error in this question or solution?
2014-2015 (March)

APPEARS IN

RELATED QUESTIONS

The SI unit of charge is volt.


Define the unit of current.


Fill in the blank:

To increase the effective resistance in a circuit the resistors are connected in _____________.


Choose the correct alternative and rewrite the following sentence.

When the resistance of a conductor increases, the current will ________ increase.


Draw the electrical symbols of the following components and state its use

Wire crossing


Draw the electrical symbols of the following components and state its use:

Rheostat (variable resistance)


Draw the electrical symbols of the following components and state its use:

Ammeter.


Fill in the folloing blank with suitable words:

 A current is a flow of ............... .For this to happen there must be a ............... circuit.


A Radio Set Draws a Current of 0.36 a for 15 Minutes. Calculate the Amount of Electric Charge that Flows Through the Circuit. 


 Which instrument is used to measure electric current? How should it be connected in a circuit?


A flash of lighting carries 10 C of charge which flows for 0.01 s. What is the current? If the voltage is 10 MV, what is the energy?


If the amount of electric charge passing through a conductor in 10 minutes is 300 C, the current flowing is:

(a) 30 A
(b) 0.3 A
(c) 0.5 A
(d) 5 A


A battery of 9 V is connected in series with resistors of 0.2 Ω, 0.3 Ω, 0.4 Ω, 0.5 Ω and 0.12 Ω. How much current would flow through the 12 Ω resistor?


A 5 V battery is connected to two 20 Ω resistors which are joined together in series.

(a) Draw a circuit diagram to represent this. Add an arrow to indicate the direction of conventional current flow in the circuit.
(b) What is the effective resistance of the two resistors?
(c) Calculate the current that flows from the battery?
(d) What is the p.d. across each resistor?


Ten bulbs are connected in a series circuit to a power supply line. Ten identical bulbs are connected in a parallel circuit to an identical power supply line. 

(b) In which circuit, if one bulbs be brighter?


In which of the following cases more electrical energy is consumed per hour?

(i) A current of 1 ampere passed through a resistance of 300 ohms.
(ii) A current of 2 amperes passed through a resistance of 100 ohms. 

 


State three factors on which the heat produced by an electric current depends. How does it depend on these factors? 


How is the electric potential difference between the two points defined? State its S.I. unit.


A wire of length 5 m has a resistance of 2.0 Ω calculate:
(a) the resistance of wire of length 1 m
(b) the equivalent resistance if two such wires each of length 2 m are joined in parallel.
(c) the resistance of 1 m length of wire of same material but of half diameter. 


Tell the odd one out. Give a proper explanation.


The following table shows the current in Amperes and potential differences in Volts.

  1. Find the average resistance.
  2. What will be the nature of the graph between the current and potential difference? (Do not draw a graph.)
  3. Which law will the graph prove? Explain the law.
V (volts) I (amp)
       4         9
       5       11.25
       6       13.5

Match the pairs.

‘A’ Group  ‘B’ Group 
1. Free electrons a. V/R 
2. Current b. Increases the resistance in the circuit 
3. Resistivity c. Weakly attached 
4. Resistances in series d. VA/LI

If a charge of 420 C flows through a conducting wire in 5 minutes what is the value of the current?


An electric current flowing in a wire creates __________ around the wire. 


How many electrons are present in 1 C?

What is fuse? Name the material of fuse.

Name the physical quantity which equals the product of voltage and current.

State two important precautions you should observe while using electricity?

Tick(✓) the correct choice in the following:

The outer casing of an electric iron is generally connected to earth in order
to


Find the effective resistance in the following circuit diagrams (Fig.):


What is the voltage of the electricity that is generally supplied to a house?


Calculate the current through a 60 W lamp rated 250 V. If the line voltage falls to 200 V, how is power consumed by the bulb affected?


Fill in the blank :

1 mA = ............................. A.


State whether the following statement is True or False:

The SI unit of charge is the coulomb. 


What should I choose ___________________

a. for decreasing resistance in a circuit.
(Resistors in series / Resistors in parallel)

b. for getting protection from electric current.
(Nickel / Ebonite)

c. to measure the current in the circuit?
(Ammeter/ Voltmeter) 

My mother was operating washing machine on Sunday morning. Suddenly, she saw a spark coming out of the electric board and the electric current in the house failed. An electrician was called to look into the matter. What should he have noticed.


Small amounts of electrical current are measured in milliampere (mA). How many milliampere are there in 0.25 A ?


______ is used to measure the electric current.


True or False – If False give the correct answer

The representation of the electric current is A


Water : pipe :: Electric current : ______.


What is the speed of electric current?


Define an electric current.


State whether true or false. If false, correct the statement.

Current can produce magnetic field.


Kilowatt hour is the unit of


The power of an electric device is a product of ______ and ______.


MCB is used to protect household electrical appliances.


The SI unit for electric current is the coulomb.


One unit of electrical energy consumed is equal to 1000 kilowatt-hour.


Match the items in column-I to the items in column-II:

Column - I Column - II
(i) electric current (a) volt
(ii) potential difference (b) ohm meter
(iii) specific resistance (c) watt
(iv) electrical power (d) joule
(v) electrical energy (e) ampere

Name any two devices, which are working on the heating effect of the electric current.


  1. What is meant by electric current?
  2. Name and define its unit.
  3. Which instrument is used to measure the electric current? How should it be connected in a circuit?

The flow of electric charge per unit time is called potential difference.


Match the following:

1. 1 mA a. series
2. 1 pA b. ohmmeter
3. Ammeter  c. 10-6 ampere
4. Electrical resistivity d. 10-3 ampere

Problems for practice:

If 5A current flows through a circuit, then convert the current in terms of microampere?


Problems for practice:

If 3A current flows through a circuit, then convert the current in terms of a milliampere.


A current of 2A passing through the conductor produces 80 J of heat in 10 seconds. The resistance of the conductor is ______.


Electric current passes through a metallic conductor due to the movement of ______.


An ammeter is always placed in parallel with the circuit.


For current to flow, one needs art open circuit.


Assertion (A): Electric current will not flow between two charged bodies when connected if their charges are the same.
Reason (R): Current is the rate of flow of charge.


What is the SI unit for the current?


What is the rate at which charges flow past a point on a circuit?


1020 electrons, each having a charge of 1.6 x 10-19 C, flows in a circuit V is 0.1s. What is the current in ampere?


Match the items in column-I to the items in column-II:

Column - I Column - II
(i) electric current (a) volt
(ii) potential difference (b) ohm meter
(iii) specific resistance (c) watt
(iv) Electrical power (d) joule
(v) electrical energy (e) ampere

Find the odd one out.


Share
Notifications



      Forgot password?
Use app×